69
70
Customer Service Toll Free: 833.3TACTILE (833.382.2845)
FLEXITOUCH PLUS with ComfortEase
3. Using your non-treatment arm, grab the inner fabric and D-ring
together. Slide your arm that will be receiving treatment, into the
garment, so the garment overlaps the biceps portion of your vest
garment sleeve (Figure 7.2.g.). The D-ring should be visible on
the top of the arm garment. Open strap ‘A,’ and thread the end of
the strap through the D-ring in an upward motion. Ensure your
fingertips remain covered. Fold over the Velcro® end of the strap
to secure it (Figure 7.2.h.).
NOTE:
To help with proper arm garment positioning, it is important to
line-up the forearm zipper on your arm garment with your thumb on
your arm that will be receiving treatment. This will allow your hand to
become more easily accessible.
NOTE:
If you are unable to thread the adjustment strap labeled ‘A’
through the D-Ring, you may use the alternative approach to preparing
your arm garment. See pages 74–76 for further instructions.
NOTE:
This step helps set the length and rotation of your arm garment
when attached to your vest garment.
Figure 7.2.h.
Figure 7.2.g.
NOTE:
Ensure your arm garment overlaps the biceps portion of your vest
garment to minimize gapping. If overlapped correctly, there should be
no gap between your vest garment and your arm garment.
4. Locate the adjustment tab labeled ‘E’ at your armpit. Unfold
adjustment tab ‘E’ and attach it snugly to conform the arm of
your vest garment around your biceps. Smooth the inner fabric,
if needed (Figure 7.2.i.).
NOTE:
A portion of the Velcro® may still be exposed.
5. Locate the adjustment tab labeled ‘D.’ Unfold and attach it to
the vest garment (Figure 7.2.j.).
Figure 7.2.j.
Figure 7.2.k.
Figure 7.2.i.
