61
62
Customer Service Toll Free: 833.3TACTILE (833.382.2845)
2. Slide your vest garment on as you would a jacket, and use the
zipper lanyard to zip your vest garment closed (Figure 7.1.c.). Put
your thumbs through the black handle loops at the front bottom
of your vest garment, and push downward to adjust positioning.
3. Open the adjustment tabs labeled ‘1,’ and attach each tab gently
toward the rear of your vest garment – one on each side – so you
are able to access the black cinch loops.
Detach both black cinch straps from your vest garment. Pull
both straps forward at the same time toward the middle of your
abdomen, without crossing your vest garment zipper, so that
you feel a gentle – but not tight – contour at your lower back
(Figure 7.1.d.).
4. Locate the adjustment tabs labeled ‘1,’ and detach them from
your vest garment. Pull both tabs forward toward the front of
your vest garment zipper, making sure not to overtighten the
garment (Figure 7.1.e.).
When applied, these tabs should overlay the black cinch straps.
NOTE:
In some cases, the end of the black cinch straps may be visible.
NOTE:
Ensure the bottom of the adjustment tabs labeled ‘1’ do not
extend below your vest garment.
FLEXITOUCH PLUS with ComfortEase
Figure 7.1.c.
Figure 7.1.d.
Figure 7.1.e.
Align at Bottom
5. Locate the adjustment tabs labeled ‘2’ under each armpit and
place your thumbs through the end of the tabs. Pull the tabs
forward and slightly upward, one at a time, to achieve a snug fit
under each armpit (Figure 7.1.f.).
NOTE:
If you’re unable to grab the adjustment tab labeled ‘2’ with
your corresponding hand, reach across with your opposite hand and
pull across and upward to ensure a snug fit under your armpits
(
Figure 7.1.g.
).
NOTE:
If you have not been prescribed head and neck treatment, you
do not need to adjust the adjustment tabs labeled ‘3’ at your collar.
Figure 7.1.g.
Figure 7.1.f.
