31
Customer Service Toll-Free: 866.435.3948
Recommended separation distances between portable and mobile RF
communications equipment and the ACTitouch System
The device is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the ACTitouch System can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the ACTitouch System as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output power of
transmitterW
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 1 .2√P
80 MHz to 800 MHz
d = 1 .2√P
800 MHz to 2 .5 GHz
d = 2 .3√P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects, and people.
Summary of Contents for Actitouch
Page 1: ...USER GUIDE ACTITOUCH SYSTEM Adaptive Compression Therapy...
Page 34: ......
Page 35: ......
