Tactile Medical Actitouch, User Manual

Page: 14 / 36

12
Fix the loop fasteners securely in place with the hook fasteners.
Ensure that fasteners are adjusted to give a close fit between the
Compression Sleeve and the leg and foot.
The correctly applied ACTitouch System will appear as shown.
WARNING: When applied, the top of the Compression Sleeve should be at least 2 .5cm
below the crease of the knee when seated .
IMPORTANT: Always ensure that the Compression Sleeve is applied in the correct
position with the control unit on the front of the leg over the shin .
Applying the sleeve too loosely may result in the unit switching off .
5 .5 Switching On the ACTitouch System in Sustained
Compression Mode
IMPORTANT: If footwear is to be worn during the treatment session, it is advisable
for the wearer to put on footwear prior to switching on the ACTitouch System .
Do not switch on the device in Sustained Compression Mode unless it is applied to
the leg .
• Ensure that the control unit is correctly inserted in the Compression Sleeve,
that the Compression Sleeve is correctly applied to the leg, and that the Power
Adapter/Charger is not connected.
• While seated, press and hold the ON/OFF button until the status indicator
illuminates (approximately two [2] seconds). The ON/OFF button can then be
released.