Tactile Medical Actitouch, User Manual

Page: 12 / 36

10
5 .4 .2 Inserting the Control Unit into the Compression Sleeve
Slide the control unit into its housing on the Compression Sleeve
until a click is felt and heard; the control unit is then secured correctly
within the sleeve.
Verify the control unit is correctly assembled by checking to see if the
blue markings are visible on the front of the control unit. If they are
visible, the control unit is not fully secure.
Incorrect placement
Correct placement
IMPORTANT: For correct functioning of the device, ensure that the control unit is
correctly inserted in the Compression Sleeve .
The patient should leave the control unit inserted into the Compression Sleeve at
all times . The battery can be charged without removing the control unit from the
Compression Sleeve .
5 .4 .3 Applying the Compression Sleeve
Place the Compression Sleeve on the floor, outer face
downward so that the chambers can be seen, with strap 2
(ankle strap) pointing toward the wearer, regardless of whether
the Compression Sleeve is to be applied to the right or left leg.
Place the arch of the foot over chamber 1 (marked with an
arrow on the Compression Sleeve) with the toes pointing in
the direction of the arrow.
Strap 1
Strap 2 (ankle strap)
Strap 3