![background image](http://html1.mh-extra.com/html/tacony/powr-flite-pas14g/powr-flite-pas14g_operators-manual_3164979006.webp)
6
2. Preparing for use
2.1 Connecting the batteries
• Unscrew the bolts that fasten the tank to the
handle support (Fig 1).
Fig 1
• Remove the recovery water tank (Fig 2).
Fig 2
• Connect the battery connectors (Fig 3 & 4).
Fig 3
Fig 4
• Replace the recovery water tank and screw
into place.
2.2 Charging the batteries
WARNING
Make sure that the building power supply
is equipped with GFI (circuit breaker).
WARNING
Charge batteries in a well
ventilated area which complies with local,
state and federal regulations and with
standards in force in the country of use.
WARNING
Check that the building power
supply matches the operating voltage of
the battery charger (100 – 120V, 50/60Hz).
• Move the machine close to a electrical
socket.
• Unwind the battery charging lead at the rear
of the machine and connect to the outlet.
• Let the batteries charge until the “Green”
LED comes on, then remove the plug and wind
the battery charging around the cable holder
(Fig 5).