background image

4

1. Product Information 

This commercial automatic scrubber is designed 

for the scrubbing/cleaning of hard floors in 

indoor areas. 

Maintenance free (gel) batteries must be used. 

A battery life indicator allows the operator 

to check the degree of battery life available, 

and an on board battery charger provides 

convenient charging. 

This machine must only be used for the 

manufacturer’s approved application. Using 

the machine for any other purpose will void 

the warranty. 

Do not use

 the machine where 

it is suspected that the floor contains health 

endangering dust or debris such as asbestos 

or chemical waste.  If this is suspected 

do not 

proceed

, contact your supervisor.

The following instructions contain important 

information about the machine and safety 

advice for the operator.

Equipment must be operated, serviced 

and maintained in accordance with the 

manufacturer’s instructions.  

If in doubt contact 

the supplier of your machine.

1.1 Important Safety Advice 

When using electrical equipment basic safety 

precautions should be followed.

• Read all instructions carefully before use.

• 

Please note that the safety information 

described in the manual supplements and 

does not replace local, state, and federal 

regulations or those standards in force in the 

country in which the machine is used.

• This appliance is suitable for commercial use. 

For example in hotels, schools, hospitals, 

factories, shops, offices, rental businesses and 

other than normal housekeeping purposes.

• This machine is not intended for use by children 

or people with reduced physical, sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning use of 

the machine by a person responsible for their 

safety.

• Keep children and unauthorized persons away 

from the machine when in use.

• Before using the appliance, check that the 

main power supply voltage corresponds with 

the voltage shown on the rating plate.

• All parts are to be positioned as indicated in 

the instructions before using the machine.

• Do not operate the machine if it malfunctions or 

is damaged in any way. Contact an authorized 

service agent for repair or adjustment.

• Do not operate the machine if it malfunctions or 

is damaged in any way. Contact an authorized 

service agent for repair or adjustment.

• Do not operate switches or touch the power 

cord plug with wet hands as this may cause 

electric shock.

• When unplugging pull on the plug, not the 

power cord.

• Do not pull or carry by cord, use cord as a 

handle, close a door on cord, or pull cord 

around sharp edges or corners. 

• Keep hair, loose clothing, fingers and all parts 

of body away from openings and moving 

parts.

• Keep cord away from heated surfaces.

• Do not use where hazardous dust is present. 

• Do not use in an explosive atmosphere.

• Do not pick up oil or other flammable material.

• Do not operate the machine while plugged in.

• The battery charging lead must be inspected 

regularly for signs of damage. If the lead 

is damaged, it must be replaced by the 

manufacturer, its service agent or a similar 

qualified person in order to avoid a hazard.

• Replace the supply cord only with the type 

specified in the instruction manual.

• Do not charge the machine with a damaged 

battery charging lead or plug, or after the 

machine malfunctions or is damaged in any 

way. Contact an authorized Service Agent for 

repair or adjustment.

• Do not charge the machine with a damaged 

battery charging lead or plug, or after the 

machine malfunctions or is damaged in any 

way. Contact an authorized service agent for 

repair.

• When re-charging ensure the area is sufficiently 

ventilated. 

• Take care when using a machine near the top 

of stairs to avoid overbalancing. 

1.2 Non intended use of the machine

WARNING

• Washing floors with water which is hotter than 

122°F (50°C).

• Using diesel/gas or corrosive detergents to 

wash floors

• Washing and sucking up corrosive, flammable 

and/or explosive liquids, even if diluted.

Summary of Contents for Powr-Flite PAS14G



















Reviews: