background image

5

1.3 General warnings about batteries

WARNING

 Use appropriate personal 

protection equipment to avoid contact 

with the skin (see standards in force in 

the  country in which the machine is used).

• Do not inhale the vapour, it is dangerous.

• Do not smoke and/or use naked flames within 

7 feet of the battery during charging, in the 

charging area and while the battery is cooling 

after charging.

• Report any liquid leaking from the battery. 

Leaks are dangerous and highly polluting. 

WARNING

 In case of fire, use approved 

Class B or C dry chemical powder 

extinguishers only. Do NOT use water to 

put out the fire.

1.4 Guidelines for the operator
WARNING 

Operators must be fully trained in the use of the 

machine in accordance with these instructions, 

able to perform user maintenance and the 

correct selection of accessories.

• Operators should be physically capable to 

maneuver, transport and operate the machine.

• Operators should be able to recognize unusual 

operation of the machine and report any 

problems.

• Only use the machine on firm level surfaces, 

with no more than a 2% slope.

• Wear suitable footwear to avoid slipping.

• Wear suitable clothing to keep dry and warm. 

• Where possible implement job rotation and 

adequate rest periods to avoid continuous use 

of the same muscles.

• Do not leave machine running unattended

• Do not smoke when using the machine.

• Do not put any objects into openings.  Do not 

use with any opening blocked. Keep openings 

free of dust, debris, hair, or anything that may 

reduce air flow.

• Keep hands and feet well clear of rotating pads 

and brushes.

CAUTION

 - This machine is for indoor use 

only and should not be used or stored 

outdoors or in wet conditions.

CAUTION

 - If it is suspected that there is 

hazardous dust or flammable materials 

stop cleaning the area immediately and 

consult your supervisor.

WARNING

 Only use accessories and 

spare parts provided with the machine 

or those approved by the manufacturer.  

The use of other accessories may impair 

the safety of the machine and void the 

warranty.

WARNING

 The machine must be 

switched off before adding or changing 

accessories.

1.5 Transporting the machine
CAUTION - THIS MACHINE IS HEAVY  

Do not attempt to lift the machine without 

mechanical assistance. 

CAUTION

 – Incorrect lifting techniques may 

result in personal injury. Do not lift large 

and heavy machines without assistance.  

Please refer to the specifications page for 

details on weight of machine.

When transporting the machine, be sure that 

all components, tanks and removable parts are 

securely fastened, and that he battery charging 

cord and plug are not trailing. To move the machine 

to the work area, adjust the pressure adjustment/

transport wheel to a higher position.  This will allow 

easy movement to the work area. Alternately, lock 

handle and tilt backwards to raise the front off the 

floor, and wheel into position.

CAUTION

 – Bumping over thresholds, curbs 

and similar obstacles can damage the 

machine. Pull the machine backwards to 

go over small obstacles.

1.6 Symbols & Markings

In order to highlight information and procedures 

regarding safety, maintenance etc, the following 

symbol has been adopted in the manual:

1.7 Electrical connection

Before connecting the battery charger to the 

power supply, check that your supply voltage 

matches the rating on the machine label.

IMPORTANT

 - If the battery charging lead 

is damaged, it must only be replaced by an 
approved cord available from the manufacturer 
or an authorized service agent.

Summary of Contents for Powr-Flite PAS14G



















Reviews: