Tacmina CLPW Series, Operation Manual

Page: 65 / 68

64
PWT series:
Timer type setting flo
w
NO
TE
•
When the po
wer is turned on,
the pre
viousl
y
e
s
ta
b
li
s
h
e
d
m
o
d
e
a
n
d
o
p
e
ra
ti
o
n
s
ta
tu
s
a
re
restored.
•
The
mode
can
be
c
hang
ed
onl
y
while
the
pump is stopped (when ST
OP is displa
y
ed).
•
If
no
operation
is
perf
o
rmed
f
or
3
seconds
on
the
settings
screen
f
or
the
maxim
um
disc
har
g
e
capacity
,
the
operation
is
canceled,
and
the
displa
y
returns
t
o
the
mode
initial
settings screen.
•
It is onl
y in the man
ual mode that settings can
be c
hang
ed e
ven while the pump is operating.
Standb
y screen.
[Current time display
]
The [minutes] can be changed using the
and
keys.
The [day of the week] can be changed using the
and
keys.
[Day of the week setting screen
]
The [hours] can be changed using the
and
keys.
[Time setting screen]
The Stroke number can be changed using the
and
keys.
[Stroke number setting screen
]
[Manual mode]
[Interval mode]
[Interval setting]
The ON period can be changed using the
and
keys.
[ON period setting screen]
The OFF period can be changed using the
and
keys.
[OFF period setting screen]
The stroke number can be changed using the
and
keys.
[Stroke number setting screen
]
[Pulse input setting]
[Pulses not to be input] [Pulses to be input]
[Pulse frequency-division mode
]
[Frequency-division setting screen
]
The frequency division can be changed using the
and
keys.
[Pulse magnification factor mode
]
[Magnification factor setting screen
]
The magnification can be changed using the
and
keys.
[WEEK mode] [DAY mode]
Pump
operation
Parameter settings screen
✽
Refer to page 32.
Fully hold this do
wn.
✽
The current time is
indicated on the display when the
key is pressed
during pump operation in the manual mode.
✽
In the interval mode, DAY
mode or WEEK mode, the current time is indicated on the display when the key is pressed during pump operation and the number of strokes that has been set is indicated on the display when the
key
is pressed during pump operation.
●
Precaution when the in pulse setting is selected
If [Pulses to be input] has been set in the interval mode, the pump operates at the pulse frequency-division or magnification that was set inside the interval ON period. (The number of strokes for the interval is disabled.)
For setting what is to be programmed in the DAY mode and WEEK mode, respectively
✽
For the program settings, refer to the next page.
33-66(白)̲EM-127̲PW(E).indd 64 2014/11/17 11:56:46