TAC AB, 1999-08-18
0-004-7516-1 (GB), 4:1 (4)
TAC Xenta 102 Handbook
Configuration parameters
4
Configuration parameters
All communication with the controller is made by means of
network variables. nci’s are used to configure the controller,
nvi’s controls the controller during operation, and nvo’s are
output variables, which the controller sends out on the network.
nci’s are normally set during commissioning, and are not
altered during normal operation (the parameters are stored in
a special memory, and can be changed a maximum of 10 000
times). In chapter 8, there is detailed information on accepted
values and default values for all parameters. All configuration
parameters have default values on delivery.
