background image

 

 

 

 

 

 

 

 

Manual Go4Platin_en COMPLETE.docx / BG 

 

48 

 

5.

 

The warranty exclusively covers such components that are essential to operating 
the product. It does not include easily damaged parts or wearing parts, such as, for 
example, glass, plastic or light bulbs. Minor deviations from the desired composition 
insignificant to the value and usability of the machine will not result in any warranty 
obligations. Damage caused by physical, chemical, electrical or electrochemical or 
other effects not related to the customary dedicated use will not result in any 
warranty obligations; neither does damage caused by water or abnormal 
environmental conditions or inappropriate operating conditions.  Also, no warranty 
can be assumed for machine defects caused by transport damage for which we are 
not responsible, incorrect installation and assembly, incorrect use, non-observance 
of operating or assembly instructions or lack of care. 

6.

 

The warranty claim becomes void if repairs or interventions have been carried out 
by the customer himself/herself or by persons who were not accordingly authorized 
or who were not authorized by us or in the event of our machines being fitted with 
spare, supplementary or accessory parts that are not original parts, or if parts have 
been removed. 

7.

 

The warranty performance will be made in such a way that defective components 
will at our discretion be repaired or replaced with faultless components free of 
charge unless improvement or exchange are impossible or would result in for us 
unreasonable cost.  In such cases, a reduction in price or, in the event of not only a 
minor defect, cancellation of sale may be claimed. 

8.

 

Machines for which a warranty performance is being claimed on the basis of this 
warranty must be handed over or sent to us. Repairs at the installation site are not 
possible. The customer will bear transport costs and the transport risk. 

9.

 

Exchanged parts will become our property. 

10.

 

Warranty performances will neither result in an extension of the warranty period nor 
will they initiate a new warranty period. 

11.

 

Further  or other claims (in particular claims for damages suffered beyond the 
machine) are excluded insofar as liability is not mandatory by law. 

 

 

Summary of Contents for Go4Platin




















































Reviews: