TAB-Austria Go4Platin, Manual

Page: 23 / 51

Manual Go4Platin_en COMPLETE.docx / BG 23
Rear Sensor
Note Path Debris Clearing / Belt Changing
To access the note path and lozenge, slide the red release catch on the end of the NV9 Validator
and lift to open. Push the lozenge release catch and lift; the note path and lozenge are now
exposed for maintenance.
Debris Clearing
Examine the note path, lozenge and the note stacker for any dirt or debris.
Carefully clear and wipe the surfaces of the note path and lozenge with a soft lint free cloth that
has been dampened with a water and mild detergent solution (i.e. household washing up liquid).
Take particular care around all the sensor lenses, ensuring they are clean and dry.
Check that the note stacker and cash box spring plate are not jammed.
Belt Changing
With the NV9 lozenge exposed carefully unplug the bottom connector of the “top to bottom
cable assembly” from the lozenge.
Remove and place the lozenge on a clean dry surface and remove the belts, sliding them off the
smallest wheels first. Replace the belts using the reverse procedure from the above.
NOTICE:
With the Locking Cash Box, the Locking screw must be removed first.