T-Drill PLUS 115 CU, Instruction Manual

Page: 9 / 65

PORTABLE
COLLARING SYSTEM
9
PLUS 115
3. T-DRILL PLUS 115 FOR COPPER TUBES, GENERAL
Your T-DRILL PLUS 115 is a special purpose unit which, when used with the T-DRILL T-65
power tool and (specially designed) T-DRILL collaring heads, is capable of producing a
range of branch connections in commercial copper tubing of sizes from 54 mm to 206
mm / 2” to 8”.
Before putting your PLUS 115 into operation, make sure you have read and fully
understood the safety instructions that apply to all power tools as well as the capabilities
and limitations of this device in particular.
The PLUS 115 must be used with the T-DRILL T-65 grounded tool supplied with a three-
prong plug and must be grounded while in use. The T-DRILL PLUS 115 is intended
primarily for use on hard copper tubes.
For an introduction video of the stainless steel machine operation, see T-Drill website:
https://t-drill.fi/plus-115-ss-portable-collaring-system-for-stainless-steel/
or scan the QR code:
3.1 TECHNICAL DATA
PLUS 115 for copper Value
Type code 7006
Run tube sizes 54 mm - 206 mm (NS 2” - 8”)
Collar sizes 54 mm - 115 mm (NS 2” - 4”)
Run tube materials Copper
Weight 68 kg