PORTABLE
COLLARING SYSTEM
17
PLUS 115
5. The depth of the drilling is controlled
by position of the indicator on the rod
assembly. Loosen the hex screw on the
indicator to adjust its position.
The depth of the drilling is controlled
by position of the indicator on the rod
assembly. Loosen the hex screw on the
indicator to adjust its position
7. Chuck the pilot hole drill. The drill is
covered by a leather sleeve to prevent
injury because of the sharp drilling
blades. Therefore remove the leather
cover only after chucking the pilot hole
drill.
8. Apply the T-Drill lubricant on the drill cutting edges.
9. Make sure the tilting plates are in the locked position (the orange handle pointing down)
Summary of Contents for PLUS 115 CU
