T-COM T-Octophon F 50 Operating Instructions Manual Download Page 76

Page: 76 / 167

Step by Step

Call Forwarding

Call Forwarding in the Event of a Tele-
phone Malfunction

If this feature is configured (ask the service personnel), you can de-

fine an internal or external call forwarding destination that becomes

effective when your telephone is not working.
Press the key. The LED lights up.

Select and confirm.

qmhee

Enter the code.

Enter the station number of the destination.

Confirm.

Deactivating call forwarding/deleting a destination:

Press the key. The LED lights up.

Select and confirm.

rmhee

Enter the code.

Confirm to deactivate call forwarding and delete the forwarding des-

tination.

Select and confirm to deactivate call forwarding without deleting the

forwarding destination.

Changing the call forwarding destination (if forwarding is ac-
tive):

Press the key. The LED lights up.

qmhee

Enter the code.

Confirm.

Change the station number of the destination.

Confirm.

HFA connections only (ask the service personnel).

Program/Service

*9411=CFSS on

Save?

Program/Service

#9411=CFSS off

Delete?

Exit?

Program/Service

Change?

Save?

Summary of Contents for T-Octophon F 50








































































































































































Search results

Summary of Contents for T-Octophon F 50

Reviews:

Related manuals for T-Octophon F 50

Brands by name

Popular brands

T-COM T-Octophon F 50, Operating Instructions Manual

Search results

Summary of Contents for T-Octophon F 50

Reviews:

Related manuals for T-Octophon F 50

Brands by name

Popular brands