Step by Step
Using Other Functions
88
• Group ringing, code:
*
81/#81
• Group call, code:
*
85/#85
• Suppress caller ID,
code:
*
• Waiting tone, code:
*
• Open door, code:
*
• Door opener on/off, code:
*
• Control relay, code
*
90/#90
• Do not disturb, code:
*
97/#97
• Ringer cutoff function, code:
*
• Speed-dialing, code:
*
7
• Associated service, code:
*
83
Precondition: You have a telephone that uses tone dialing (DTMF di-
aling) or you can switch your telephone to tone dialing. The tele-
phone is not connected to the system.
o
Set up a call to the system. Enter the station number (contact your ser-
vice personnel).
o
Wait for a continuous tone (if necessary switch the telephone to tone
dialing), then enter the internal number that has been assigned to you
and the associated PIN.
r
Enter the code (necessary only if programmed in the system).
o
Wait for a dial tone and then enter the code, such as
*
97 for Do not
disturb on. Make other inputs as necessary; (refer to the operating in-
structions for pulse and DTMF telephones).
or
o
Dial the external number.
You can only execute one function at a time, or set up only
one outgoing connection.
The connection is immediately released after successful ac-
tivation of a function.
In the case of an external-external call, the connection is re-
leased as soon as either of the parties ends the call.
