T-COM T-Octophon F 50 Operating Instructions Manual Download Page 68

Page: 68 / 167

Step by Step

Saving Station Numbers, Functions, Procedures and Appointments

Flashing rapidly- A call has arrived on this line; press the key to pick

up the call.

Flashing slowly - A call on this line was placed on hold.
Trunk group key

At least one trunk is free.
All trunks in the trunk group are busy.
View call charges:

No chargeable calls have been made since the last time call charges

were displayed.
Chargeable calls have been made since the last time call charges

were displayed.
Call forwarding, Forward Line:
Flashing slowly - Either you or your trunk is the destination of a for-

warded call.
Fax details

No fax received or no message on answering machine.
Fax received or message on answering machine.
View number of calls:

No callers waiting
Flashing rapidly - Callers waiting (a certain number is exceeded).

Flashing slowly - Callers waiting (a certain number was reached).
The following functions are assigned to keys which have no LED:

Repdial key (external), Procedure key, Trace call, Speed-dial, Release

call, Clear, Lock all phones, Send message, Phonebook, Call waiting,

Shuttle, Conference, Speaker call, Retrieve line, Reserve trunk, Re-

lease trunk, Temporary Phone, Override, Call Park, Pickup - directed,

Pickup - group, Account code, Show call charges, Radio paging

equip, Answer page, Timed reminder, Open door, DTMF dialing, Re-

call key, Room monitor, Hold key, Consultation, Associated dial, As-

sociated serv., Tel. data service, Relocate, Mobile Logon (HFA only)

Summary of Contents for T-Octophon F 50








































































































































































Search results

Summary of Contents for T-Octophon F 50

Reviews:

Related manuals for T-Octophon F 50

Brands by name

Popular brands

T-COM T-Octophon F 50, Operating Instructions Manual

Search results

Summary of Contents for T-Octophon F 50

Reviews:

Related manuals for T-Octophon F 50

Brands by name

Popular brands