61
When the picture norm
“RGB” is selected for the
Component output in the
DVD player setup menu, the
picture is not correct when
a DVD is played.
Cause 1:
The
K2
’s output signal in RGB mode is what is known as an RGB signal with
Sync on Green. This signal is not compatible with the RGB signal with FBAS
Sync, as used in Scart connections, and cannot be processed by all video
monitors. It is intended primarily for use with professional projectors.
Remedy:
Ensure that the monitor or projector connected to the system is capable of
processing “RGB / Sync on Green” signals.
If this is not possible, use the Component video norm YUV.
No picture from the iPod.
Cause 1:
Video output switched off at the iPod.
Remedy:
Switch on video output on your iPod.
Cause 2:
A standard analogue video lead (FBAS) is not connected between the
K2
and
the video monitor.
Remedy:
The iPod only generates video signals in standard video form (FBAS). If you
use the analogue component output (YUV) or the digital HDMI output for DVD
playback, an FBAS video lead must be connected between the
K2
and the
video monitor in addition to the YUV or HDMI lead.
Switch your iPod’s video output on, and select the video input on your monitor
to which the FBAS output of the
K2
is connected.
Cause 3:
Your iPod does not support video output.
Remedy:
Ensure that you are using a model of iPod which supports video output.
