51
Special case:
Manual Network Entry
The
K2
automatically searches for accessible radio networks, and lists them
when you call up the menu point 'WLAN Configuration'. However, the
K2
can only
locate networks which broadcast their SSID network identity. For security reasons
many radio networks do not transmit the SSID (if you are not sure about this, ask
your network administrator). In such cases the network cannot be found and
displayed automatically, i.e. it must be set up manually. This is the purpose of the
menu point 'Set Manually'. If you select this menu point, you will see the input
window reproduced below; you can enter the parameters for your network at this
point.
After successfully entering all the data, please select the point 'Save WLAN
Settings', and confirm by pressing the
button. Your
K2
now accepts the
data you have entered relating to the WLAN network, and moves on to the
subordinate menu in which you can set the remaining network parameters, as
described earlier in the section entitled
'Setting the Parameters for a Wired
Network'
.
You can now leave the Configuration menu by selecting the menu point 'Save
and restart'.
