43
Optimising your system
Loudspeaker cables, inter-connects
Loudspeaker cables and signal leads (inter-connects)
have a significant influence on the overall reproduction
quality of your sound system, and their importance
should not be under-estimated. For this reason
recommends the use of high-quality cables and connec-
tors.
Our accessory range includes a series of excellent ca-
bles and connectors whose properties are carefully
matched to our speakers and electronic units, and which
harmonise outstandingly well with them.
For difficult and cramped situations the
range also
includes special-length cables and special-purpose con-
nectors (e.g. right-angled versions) which can be used to
solve almost any problem concerning connections and
system location.
Mains cables and mains filters
The mains power supply provides the energy which your
sound system equipment needs, but it also tends to carry
interference from remote devices such as radio and
computer systems.
Our accessory range includes the specially shielded
'POWER FOUR'
mains cable, ready-to-use
'POWER LINE'
mains cable with integrated shell-type filters, and the
'POWER BAR'
mains filter distribution board which pre-
vent electro-magnetic interference from entering your Hi-
Fi system.
The reproduction quality of our systems can often be
further improved by using these items.
If you have any questions regarding cabling please refer
to your specialist
dealer, who will gladly give you
comprehensive expert advice without obligation. We
would also be happy to send you our comprehensive
information pack on this subject.
Mechanical de-coupling
The base and surface on which your high-quality Hi-Fi
equipment is set up have an important influence on the
sound quality which the system can achieve.
The base should be as heavy, stable, hard and level as
possible. The decoder is supplied with newly developed
conical absorber feet. These feet have internal
damping characteristics, and de-couple the unit from the
base very effectively.
Note:
You can screw the
conical absorber feet in or out to
compensate for any slight unevenness in the base sur-
face.
The unit must be adjusted to stand exactly horizontal in
every direction. All the feet must have a firm contact with
the base surface; the case must not wobble!
