16
Speaker Position Setup
In the
'
Speaker Position Setup
'
you can enter the dis-
tance from the listening position (in 0.3 m increments) for
each loudspeaker separately.
This enables the decoder to compensate for timing dis-
crepancies due to differences in speaker location.
Measure the distance between the listening position and
the loudspeakers in your surround system, and enter the
measured distances.
As the illustration shows, you use the select buttons to
move to the input positions in the following sequence.
Output channels not in use (see
'
Speaker Setup
'
) can-
not be edited.
•
Main loudspeaker front left
(
FL
)
•
Center loudspeaker front center
(
Center
)
•
Main loudspeaker front right
(
FR
)
•
Surround loudspeaker rear right
(
SR
)
•
Surround loudspeaker rear left
(
SL
)
•
Active subwoofer (any position)
(
Sub
)
Use the change buttons to enter the measured distance
in increments of 0.3 m.
Note:
The maximum distance of a loudspeaker to the listening
position is 12 m. For acoustic reasons greater distances
cannot be recommended, and the system cannot com-
pensate for timing errors over a range greater than 12 m.
