22
Video
(2
nd
column)
In this column you enter the decoder’s
video input
to
which each AV source device is connected. The follow-
ing
Video
decoder inputs are available:
DVD
STB
VCR
TV
AUX-AV
---
Note:
You must also assign the appropriate video norm in the
‘Video Setup’
.
Audio
(3
rd
column)
In this column you enter the decoder’s
audio input
to
which each AV source device is connected. The follow-
ing
Audio
decoder inputs are available:
DIG1
DIG2
DIG3
DIG4
DIG5
DVD
STB
VCR
TV
AUX-AV
5.1
TASI
1)
1)
The system automatically enters
TASI
for all source
devices which are connected directly to the
stereo
amplifier
.
Note:
If you select a video input (
DVD
STB
VCR
TV
or
AUX-AV
) for the current AV source device in the
second column, the system automatically enters the
same input as the analogue audio input.
If the device in fact has a digital output, you can alter this
entry manually.
Key
(4
th
column)
The source devices connected to the decoder can be
selected by repeatedly pressing the
2
2
2
2
button on
the front panel, or the
button on the remote con-
trol handset.
For devices which you will use very often, you can enter
a direct select button, e.g.
AUX1
for the DVD player.
In that case you can directly select the source device in
surround mode using the source buttons defined at this
point, instead of pressing the
2
2
2
2
or
button
repeatedly.
In this column you can enter any of the following source
buttons on the remote control handset:
CD TUNER TAPE-1 TAPE-2
TV AUX-1 AUX-2 AUX-3
SRND
*)
Every
-source device has its own remote control
address which the system automatically takes into ac-
count when you assign the source buttons. For example,
a CD player has the remote control address
'CD'
, and a
tuner the remote control address
'TUNER'
. The system
then automatically assigns the source button
CD
to
the CD player, and the source button
TUNER
to a
tuner.
Several
source devices allow you to alter their re-
mote control address.
Example
:
The DVD player can be set to the address
‘CD’
or the
address
'AUX'
by means of a switch on the back panel of
the DVD player. In this case you obviously have to as-
sign the DVD player either to the source button
CD
or
the source button
AUX1
, depending on the remote
control address you have selected.
Each device to which you have assigned a source button
on the remote control handset (
#
#
#
#
. . .
f
f
f
f
) can
be selected in surround mode by means of the corre-
sponding source button.
*) If you assign the source button
SRND
to a source
device, it will have
no direct select button
. These
devices can then be selected by repeatedly pressing
the
2
2
2
2
or
button. In each case the cur-
rent source device name is displayed on the de-
coder’s screen.
