SYX66x Commissioning Guide
V1.10.3 300117
Page 18 of 61
Once logged into the controller at Level 2 select each menu in turn and configure the Set-Up options as discussed
below. Only the Set-up options should be configured at this time, do not worry about the other parameters as these
may not be required.
The following tables show the application configuration settings for each Set-Up menu option.
For example, Select Overrides then navigate to the menu Option Set-Up. Complete as required then move onto the
Heating Menu and navigate to the Set-up option etc etc.
After the Set-Up options have been checked you can go back into the individual menus and adjust the other
associated parameters as required to get the best application performance. These are listed in the Parameter
Summary page 25.
Set-Up Options inside the Override Menu
HINT: Heating, HWS, Boilers, Overrides etc each have set-up options
Set-Up Options inside the Heating Menu
