SYX66x Commissioning Guide
V1.10.3 300117
Page 17 of 61
5
Access and Controller Configuration
To Set-up the controller, the user must be logged into the SYX66x at level 2.
To access the Logon Screen on the controller please Press and Hold the ESC button for 5 Seconds.
Select User 2
The passcode for Set-up level is 0112
Turn and Press the Wheel to select the above code
Once you have 0112 on the Controller press the Select Button to enter it
To access the Logon Screen using the browser or the TPC Touchscreen select the Logon Button in the bottom corner
and follow the same instructions as above but using the keys on the screen. Press enter on the screen to enter the
value.
Once at this User Level the Set-Up Menu options are available to tune the controller to the application you have.
Each menu shown on the controller interface (shown below) has application Set-Up features inside.
The controller offers a menu structure and the navigation can be made using the controller interface or the web
browser. The controller offers two different browser options as shown below with and without /mo/ after the IP address
of the controller and either can be used:
Above: example 192.168.1.99/mo/
Above: example using basic browser on 192.168.1.99
