Systor DiscMaster 101P, Setup & Operation Manual

Page: 10 / 164

The Printer Parts (continued)
The Power Button turns the DiscMaster unit ON or Off, the
DiscMaster unit will turn on automatically when plugged in
(EXCEPT for the first time that the unit is plugged in with the Disc
Transport Robot in the parked position).
The Control Button with the front cover open, pressing the control
button will move the Ink cartridges into the center position for
easier access when changing Ink cartridges. After closing the front
cover, the cartridges will move back to the Ready to Print position.
This button is also used to reset the printer if any errors occur.
The Control Lights are the two LEDs which show the status of the
printer. The Green lighted LED indicates that the printer is powered
on. The Red LED gives indication of any errors occurring and the
position of the ink cartridges while changing cartridges.
The Input Disc Basket is where you load up to 50 blank ink-jet
Printable discs prior to Printing/Burning operations during normal
operation.
The Output Disc Basket is where the Disc Transport Robot places
the completed Printed/Burned discs during normal operation.
The CD/DVD Recorder is the unit in the DiscMaster 101P CD/DVD
Publisher where data is burned onto the blank ink-jet Printable
discs.
The Recorder Open/Close Button is used to manually eject discs
from the CD/DVD recorder.
Normally only used if an error occurs during disc burning such as
loss of power.
The Center Output Area is where your DiscMaster unit will
automatically place bad/rejected discs during normal operation. A
disc may be rejected for a number of reasons such as,
bad/unburnable media, improper disc size, or power loss during
operation. This area is also used as an output area with installation
of the optional Systor 100 Disc Kiosk Kit.
12