SerialGate User Guide
67
Chapter 7.
Configuration via LCD
This feature is for SG-2xx0 model only.
Through the LCD on the front panel, a user is able to test operation of each interface and configuration.
By default, the LCD displays communication status of each port, and by operating the keys next to the
LCD, the interface can be tested.
LCD and Key Operation
The LCD screen can display 16 characters with 2 lines. Four buttons are there to configure the
operating environment.
The function of each key is as follows.
Key
기능
MENU /
OK
Go to sub-menu from the current menu / Menu entry / Setting mode entry / Set /
Select
Go to the previous menu / Move to previous item / Raise the number of IP mode
Go to the next menu / Next item / Reduce the number of IP mode
Go to the high-level menu
/ Change the settings in the setup mode, or move the
cursor to the left
Go to the low-level menu
/
Menu entry
/
Setting changes to take effect
/
Change
the settings in the setup mode, or move the cursor to the right
