SerialGate User Guide
65
Commands
Default
Description
def port x keepalive
<0 ~ 65535>
0
When set to ‘1’, network status is check with given time
period after socket connection is established.
def port x latency
<msec>
0
This needs to be set when consecutive data from the given
serial port needs to be transmitted to socket at once.
def port x login
<Enable/Disable>
Disable
When the Operation Mode is set to TCP Server, ask for the
username and password when the client tries to connect.
def port x loginname
<username>
None
When the Operation Mode is set to TCP Server, set the
username to ask for(Max 8 bytes)
def port x loginpass
<password>
None
When the Operation Mode is set as TCP Server, set the
password to ask for( Max 8 bytes)
def port x
termination
<Enable/Disable>
Disable
Set termination for each port.
def port x nodelay
<enable/disable>
Disable
Set the TCP no_delay option for each port.
def port x slaveno
<0 ~ 16>
0
Set the number of Modbus TCP Slave connected to the
serial port.
SerialGate supports up to 32 Modbus TCP slave
connections and supports up to 16 Modbus TCP slave
connections per one serial port .
def port x slaveip
<slave number>
<slave ip number>
0.0.0.0
Set Modbus TCP IP address corresponding to the < slave
number>
def port x slaveport
<slave number>
<slave port number>
0
Set Modbus TCP port number corresponding to the < slave
number>
def port x slaveid
<slave number>
<start id>
<end id>
0
Set the Modbus TCP slave device ID or the range of IDs
corresponding to the <slave number >
Username/Password Commands
Configure username and password for Web Manager/Telnet/FTP.
Commands
Default
Descriptions
