Portbase User Guide
All environment settings are completed by the set of commands above.
With the command set “view”, you can view new settings, and with the command set “reboot”, Portbase is
restarted so that new settings are affected.
From a telnet program in PC1 or PC2, you can connect to the serial device attached to the first serial port
of Portbase by the following telnet command.
After the connection is established, data inserted by the telnet program is transferred to the serial device
attached to the first serial port of Portbase. All data transmitted by the serial device is printed on the telnet
program screen.
If the COM port Redirector is installed and the serial ports of Portbase are used as the COM ports in PC1
or PC2, the command set “port 1 protocol tcp_server” listed above must be changed to set “port 1
protocol com2kxp”. The first serial port of Portbase needs to be registered as the user-defined COM port
of PC1 or PC2 after the Redirector is installed. (For more information on installing the Redirector, refer to
Chapter 4. COM Port Redirector
.)
54
