manualshive.com logo in svg

SystemBase Portbase-3010, User Manual, Page: 27 / 118

Share
Download
SystemBase Portbase-3010 User Manual Download Page 27

 

Portbase User Guide 

 

                         

 

 

 

Subnet Mask (Default: 255.255.255.0) 

Set the Subnet mask. (When WAN port is used with static IP) 

 

 

Gateway  (Default: 192.168.1.1) 

Set the Gateway address. (When WAN port is used with static IP) 

                 

 

PPPoE Connection  (Default None) 

Set this option when network connection is established through xDSL modems. 

When PPPoE Connection is selected, IP Configuration is ignored, be it either DHCP or Static IP.   

 

 

PPPoE Username  (Default None) 

Username to be provided to ISP for PPPoE network connection 

 

 

PPPoE Password  (Default None) 

Password to be provided to ISP for PPPoE network connection 

 

 

DNS Server   

Register the Domain Name Server (DNS). Upto 5 DNS can be registered. 

Using the Add, Delete option, DNS can be added or deleted. 

 

 

                       

 

 

27 

Summary of Contents for Portbase-3010























































































































Reviews:

No comments