Portbase User Guide
are received. After the 100 bytes are entirely received, it transmits this data to the server as one
packet, using the socket. If the buffering value is set to ‘0’, however, data transmission is done in
received byte-scale as multiple packets sent to the server.
set “port <x/ all/ x-x> serverip <IP Address>”
Set the IP address of the server to connect when the protocol is used in tcp_client mode.
set “port <x/ all/ x-x> serverport <Number of Sockets>”
Set the socket number of the server to connect when the protocol is used in tcp_client mode.
The following commands only operate in PB-3010M.
set “port <x/ all/ x-x> ppps”
Use the modem port for PPP server
set “port <x/ all/ x-x> pppl”
Use the modem port for console login
When in this mode, system commands can be used by connecting to Portbase.
set “port <x/ all/ x-x> pppc”
Use the modem port for PPP client
set “port <x/ all/ x-x> pppauth <none,papchap>”
Set the authentication mode.
set “port <x/ all/ x-x> console username <Username>”
Add a user for console login.
set “port <x/ all/ x-x> console password <Password>”
Set a password of the user for console login.
set “port <x/ all/ x-x> pppusername <Username>”
Add a user for PPP connection.
set “port <x/ all/ x-x> ppppassword <Password>”
Set a password of the user for PPP connection.
50