SystemBase Portbase-3010 Page 43 User Manual Download

Page: 43 / 118

Portbase User Guide

Firmware Update

Firmware is an operating system embedded in Flash memory of Portbase.

The recent firmware for Portbase can be found and downloaded in the website of SystemBase,

http://www.sysbas.com/

Set the location of the firmware file to update, using the ‘Browse…‘ button.

The selected firmware will be transferred to Portbase when you click ‘Upload’.

After the transmission is complete, Portbase will be automatically restarted to operate with the new

firmware.

Factory Default

Restore all the configuration parameters to the factory default values.

Clicking on ‘Factory Default’ button will delete all the current settings and change these settings to

the initial status.

If you want to use Portbase with the default settings, Portbase must be restarted by using ‘Save &

Reboot’ menu.

Summary of Contents for Portbase-3010























































































































Search results

Summary of Contents for Portbase-3010

Reviews:

Related manuals for Portbase-3010

Brands by name

Popular brands

SystemBase Portbase-3010, User Manual

Search results

Summary of Contents for Portbase-3010

Reviews:

Related manuals for Portbase-3010

Brands by name

Popular brands