manualshive.com logo in svg

SystemBase Portbase-3010, User Manual, Page: 26 / 118

Share
Download
SystemBase Portbase-3010 User Manual Download Page 26

 

Portbase User Guide 

 

                         

 

 

2)

 

Network Settings 

 

Configure the external network environment for Portbase. 

There are three sub-sections for the Network Settings page : Network, NAT, and Management. 

Network configures the WAN port connection environment. 

NAT configures the LAN port operation environment (DHCP Server). 

Management configures various parameters used for Portview,   

the management program for Portbase. 

 

①

 

Network Settings 

.

 

 

 

IP Configuration (Default: Static IP) 

To achieve the IP to the WAN port from the external DHCP server, set as DHCP.   

If a pre-defined IP is used for the WAN port, set as Static IP. 

 

 

IP Address  (Default: 192.168.1.71) 

Set the IP address when the WAN port is to be set as static IP.   

(Select Disable for the DHCP Client) 

 

 

                       

 

 

26 

Summary of Contents for Portbase-3010























































































































Reviews:

No comments