ii
System Level Solutions
January 2013
USB 2.0 (USB20SR) Device IP Core User Guide
IP Usage Note
The Intellectual Property (IP) core is intended solely for our clients for physical integration into their own technical products
after careful examination by experienced technical personnel for its suitability for the intended purpose.
The IP was not developed for or intended for use in any specific customer application. The firmware/software of the device
may have to be adapted to the specific intended modalities of use or even replaced by other firmware/software in order to
ensure flawless function in the respective areas of application.
Performance data may depend on the operating environment, the area of application, the configuration, and method of
control, as well as on other conditions of use; these may deviate from the technical specifications, the Design Guide speci-
fications, or other product documentation. The actual performance characteristics can be determined only by measure-
ments subsequent to integration.
The reference designs were tested in a reference environment for compliance with the legal requirements applicable to the
reference environment.
No representation is made regarding the compliance with legal, regulatory, or other requirements in other environments. No
representation can be made and no warranty can be assumed regarding the suitability of the device for a specific purpose
as defined by our customers.
SLS reserves the right to make changes to the hardware or firmware or software or to the specifications without prior notice
or to replace the IP with a successor model to improve performance or design of the IP. Of course, any changes to the
hardware or firmware or software of any IP for which we have entered into an agreement with our customers will be made
only if, and only to the extent that, such changes can reasonably be expected to be acceptable to our customers.
Copyright©2013, System Level Solutions, Inc. (SLS) All rights reserved. SLS, an Embedded systems company, the styl-
ized SLS logo, specific device designations, and all other words and logos that are identified as trademarks and/or service
marks are, unless noted otherwise, the trademarks and service marks of SLS in India and other countries. All other prod-
ucts or service names are the property of their respective holders. SLS products are protected under numerous U.S. and
foreign patents and pending applications, mask working rights, and copyrights. SLS reserves the right to make changes to
any products and services at any time without notice. SLS assumes no responsibility or liability arising out of the application
or use of any information, products, or service described herein except as expressly agreed to in writing by SLS. SLS cus-
tomers are advised to obtain the latest version of specifications before relying on any published information and before
orders for products or services.
ug_ipusb20sr_1.3