3R-770.6-1 / 3R-770.46-1
Instruction for Dynafix base for CMM
2
System 3R International AB
©
I-814-E 02.12 Subject to modifications
Contents
General ..................................................................................... 3
Function.................................................................................... 5
Installation................................................................................ 8
Alignment ................................................................................. 9
Maintenance ........................................................................... 11
Checking springs and O-ring - Dynafix ................................ 11
Checking springs and O-ring – Macro or Combi ................. 13
Parts list.................................................................................. 14
Do not use this equipment until you have read through the
instructions and are well conversant with the contents.
Keep this instruction in a safe place for future reference.
This equipment may never be used, by itself or in
combination with, other equipment or accessories for any
purpose other than that for which it is intended.
Do not hesitate to get in touch with the nearest 3R-
representative if you have any questions.
This instruction applies for 3R-article:
Article number
3R-770.6-1 / 3R-770.46-1
Quality certificate
C-00846-02.12 / C-00847-02.12
System 3R International AB
System 3R International 1997
Sorterargatan 1
S-162 50 Vällingby
Sweden
