Syscom Video Direct IP, Operation Manual

Page: 54 / 73

Operation Manual
48
Check the Motion Detection box to set up a motion detection event. When the camera detects a
motion in a configured motion detection zone, it considers the motion as an event.
 Sensitivity : Set the motion sensitivity for daytime and nighttime independently. The higher the
number is, the more sensitive it is.
 Minimum Blocks for Detection
: Adjust the minimum number of detection blocks that must be
activated in order to be considered as a motion event for daytime and nighttime independently.
 Motion Zone : Click the Setup… button and a motion detection zone setup screen appears. Define
the area (max. four) of the image that you want to set up a motion detection zone by using the
motion detection zone icons.
− (Select) or (Clear): Click to select or clear a block for motion detection. You can select
or clear the several blocks of an area using the mouse dragging.
−
or (One or All block): Click to select or clear one or all blocks at a time.
− (Area): Click to select or clear several blocks of an area
.
 Motion Ignoring Interval : Select the motion ignoring dwell time from the drop-down list. The
camera will not log or send notifications of motion events occurring during the preset interval
after a motion is detected. You can control excessive event logging and remote notifications
of motion detection events by adjusting the motion ignoring dwell intervals.
 Daytime : Set up the daytime range. The camera will consider the remaining time range as the
nighttime.
 Event Action : Check the box for each action the camera is to take when it detects a motion
detection event.
− Alarm Out : Check the box to trigger an alarm-output signal.
− Send Email : Check the box to send an email. Selecting Image Attachment attaches an event
detected image file (.JPG) to the email.
− Remote Callback
: Check the box and select the remote systems to send a message (Not
supported for the WebGuard program).
− Audio Alarm : Check the box and select the audio file (.wav) to sound.
− FTP Upload : Check the box to upload images to an ftp server.
− Record : Check the box to record video
.
NOTE: You must properly configure the settings related to each event action when setting them
up to enable event actions. Refer to the Event Action setup.