Syscom Video Direct IP, Operation Manual

Page: 40 / 73

Operation Manual
34
MAT
Check the
MAT
box to use the MAT (Motion Adaptive Transmission) function for video streaming
and recording.
 Sensitivity : Set the motion sensitivity. The higher the number is, the more sensitive it is.
 Inactivity Period
: Set the inactivity period. The camera will transmit or record images in
Frame
Rate
set below until any change is detected after the inactivity period when no motion is detected
during the preset inactivity period.
 Frame Rate : Select the frame rate to be applied when no motion is detected. This frame rate
may change when the slow shutter mode is enabled in the Video – Camera menu. The selected
frame rate will be applied until any motion is detected after the inactivity period and will return
to the normal frame rate set during the
Stream
setup immediately upon detecting any motion.
NOTE: The MAT (Motion Adaptive Transmission) function allows you to reduce bandwidth overload
and to save storage capacity by reducing the frame rate when no motion is detected. The camera
considers that no motion is detected when no change is detected between two consecutive images
based on the sensitivity setting.