Syscom Video Direct IP, Operation Manual

Page: 38 / 73

Operation Manual
32
 Frame Rate : Set the frame rate of images for streaming. The frame rate of the current stream
cannot exceed that of a stream of higher priority if the resolution of the current stream is the same
as that of the stream of higher priority.
 Default Record Stream
: Select a stream to use for recording. If a recording stream is set up
in a remote program or recording on an SD memory card is enabled in this camera, this setting
may not be applied. Refer to the
Event Action – Record, Preference setup for details.
 Multi-View Streaming : It allows you to set up a streaming area to stream specific area of video
(not supported for the primary stream). Click the Setup button and set up the streaming area.
Checking the On box allows you to set up the
streaming area.
− Resolution Limit
: Displays the available
maximum resolution of the streaming area.
− Resolution : Sets the streaming area. The
streaming area is displayed in red on the
screen above and you can adjust the area
resolution or moves the area location by
using the mouse drag and drop.
− Current Resolution
: Displays the current
resolution of the streaming area
.
NOTE: Simultaneous connections to the camera might cause the frame rate to decrease due
to the network bandwidth overload.