Syscom Video Direct IP, Operation Manual

Page: 19 / 73

Network Camera
13
Chapter 3 — Remote Setup
Remote Setup allows you to change all settings of a camera.
Camera Protocol
The camera supports DirectIP
TM
and Open protocols.
 DirectIP
TM
Protocol :
− It enables connection to the camera without the need to configure network settings of the
camera by using with a DirectIP
TM
NVR.
− It allows you to change all settings of the camera directly from the DirectIP
TM
NVR, without
the need for a PC. See the NVR User’s Manual for details.
 iNEX Protocol :
−
It enables connection to the camera over the network from software installed on a PC or a
separate NVR if network settings of the camera are configured correctly.
− It is ideal when a DirectIP
TM
NVR is not available.
NOTE: Illustrations and descriptions in this manual refer to the Open protocol.
1.
Run the INIT program, select a camera and click the Setup icon on the Main screen.
2. Select Protocol Setup from the Setup menu and the Protocol Setup screen appears. You
can also display the Protocol Setup screen by selecting a camera, clicking the right mouse
button and selecting
Protocol Setup
on the Main screen.
3.
Select iNEX .
4. Select a camera and click the Setup icon on the Main screen → Select
Remote Setup
from the Setup menu and the Remote Setup screen appears. You can also display the Remote
Setup screen by selecting a camera, clicking the right mouse button and selecting Remote
Setup on the Main screen.