manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 58

USB-CANmodul

                                                                                                                                                

                                                                                                                                                

56

 SYS TEC electronic GmbH 2001     L-487e_6

USBCAN_ERRCMD_NOTEQU

Value: 0x40

Description:
This error code occurs during communication between the PC
and a USB-CANmodul.  The PC sends a command to the USB-
CANmodul, then the module executes the command and returns
a response to the PC. This error message returns if the answer
does not correspond to the command.

USBCAN_ERRCMD_REGTST

Value: 0x41

Description:
The software tests the CAN controller on the USB-CANmodul
when the CAN interface is initialized.  Several registers of the
CAN controller are checked.  This error message returns if an
error appears during this register test.

USBCAN_ERRCMD_ILLCMD

Value: 0x42

Description:
This error message returns if the USB-CANmodul receives a
non-defined command.  This error shows a version conflict
between the firmware in the USB-CANmodul and the
USBCAN32.DLL.

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands