manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 54

USB-CANmodul

                                                                                                                                                

                                                                                                                                                

52

 SYS TEC electronic GmbH 2001     L-487e_6

USBCAN_ERR_MAXMODULES

Value: 0x02

Description:

An application has tried to open more than 10 USB-
CANmoduls.  The standard version of the USBCAN32.DLL
only supports up to 10 USB-CANmoduls at the same time.  This
error also appears if several applications try to access more than
10 USB-CANmoduls.  For example, application 1 has opened 5
modules, application 2 has opened 5 modules and application 3
wants to open a module. Application 3 receives this error
message.

USBCAN_ERR_HWINUSE

Value: 0x03

Description:
An application tries to initialize a USB-CANmodul with the
device number x.  If this module has already been initialized by
its own or by another application, this error message is returned.

USBCAN_ERR_ILLVERSION

Value: 0x04

Description:
This error message returns if the firmware version of the USB-
CANmodul is not compatible to the software version of the
USBCAN32.DLL.  In this case, install the USB-CAN driver
again.

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands