Sys Tec Electronic USB-CANmodul System Manual Download Page 28

Page: 28 / 74

USB-CANmodul



SYS TEC electronic GmbH 2001 L-487e_6

Figure 11:

PCANView (USBCAN) with Messages

This screen is divided into two sections: Receive and Transmit

•

Receive:

monitors CAN signals that are received from a node

•

Transmit:

monitors CAN signals sent from the host-PC to the
CAN network via the USB-CANmodul

Receive Section

The Receive section provides the following information:

•

Message:

identifier of the CAN message, hexadecimal format,
ranging from 0 to 7FFh for 11-bit identifiers and from
0 to 1FFFFFFFh for 29-bit identifiers

•

Length:

data length code of the message (ranges from 0 to 8)

•

Data:

values of the messages’ data bytes (up to 8) or the text
Remote request, if a remote frame has been received

•

Period:

period of time between the reception of the last two
messages with this identifier

•

Count:

number of messages received with this identifier (no
remote frames) since last user reset

Summary of Contents for USB-CANmodul











































































Search results

Summary of Contents for USB-CANmodul

Reviews:

Brands by name

Popular brands

Sys Tec Electronic USB-CANmodul, System Manual

Search results

Summary of Contents for USB-CANmodul

Reviews:

Brands by name

Popular brands