manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 16

USB-CANmodul

                                                                                                                                                

                                                                                                                                                

14

 SYS TEC electronic GmbH 2001     L-487e_6

2.1.6

 

Starting PCANView (USBCAN)

The included program PCANView (USBCAN) is a CAN bus monitor
for Windows.

•

 

Start the utility program using the Windows Start button and
browse to Programs \ USB-CANmodul Utilities \ PCANView
(USBCAN).  It is recommended that you drag the PCANView
(USBCAN) icon onto the desktop of your PC.  This enables easy
start of this utility program by double-clicking on the icon.

•

 

The USB-CANmodul window will appear:

Figure 4:

Dialog Box with Hardware Configuration

•

 

Select the baudrate of your CAN network in the Baudrate box and
the  Device Number. The entry any selects the USB-CANmodul
that is found first by Windows. Click on the OK button to enable
these settings.

•

 

A new window PCANView – Connect to net will appear.

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands