manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 13

Getting Started

                                                                                                                                                

                                                                                                                                                

 SYS TEC electronic GmbH 2001     L-487e_6

11

2.1.3

 

Checking the Device Installation

You can check to see if the module is logged-on properly to the host-
PC in the following way:

•

 

Highlight the icon “My Computer” on the desktop and click the
right mouse key.

•

 

A pop-up menu appears.  Click on “Properties”.  The dialog box
“System Properties” appears.

•

 

Choose the tab “Device Manager” at the top.  Click on the pull-
down menu “Universal Serial Bus Controller”. If the device
“Systec USB-CANmodul (usbcan.sys)” is shown in the list, the
new USB device has been detected properly.  This is shown in the
figure below:

Figure 1:

Device Manager with the USB-CANmodul

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands