manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 46

USB-CANmodul

                                                                                                                                                

                                                                                                                                                

44

 SYS TEC electronic GmbH 2001     L-487e_6

Receive buffer in CAN controller is overrun

USBCAN_CANERR_BUSLIGHT

= 0x0004

Error limit 1 in CAN controller exceeded

USBCAN_CANERR_BUSHEAVY

= 0x0008

Error limit 2 in CAN controller exceeded

USBCAN_CANERR_BUSOFF

= 0x0010

CAN controller is in BUSOFF state

USBCAN_CANERR_QOVERRUN

= 0x0040

Receive buffer in module is overrun

USBCAN_CANERR_QXMTFULL

= 0x0080

Transmit buffer in module is overrun

USBCAN_CANERR_REGTEST

= 0x0100

CAN controller not found (hardware error)

This WORD is bit oriented; it can register multiple errors
simultaneously.

WORD  m wUsbStatus is becoming obsolete and is retained only for
compatability purposes.  It retains the value 0.

Description:
Returns the error status from the USB-CANmodul.  If an error
occurred on the USB-CANmodul, the red status LED starts blinking
and a status information is returned to the PC.  If a callback function
has been handed over to the function UcanInitHardware (), this
callback function is called, as well as the event
USBCAN_EVENT_STATUS.  After calling the function
UcanGetStatus (), the error state on the USB-CANmodul is erased
and the red status LED stops blinking.

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands