CIPHER 1022 User Manual
- 6 -
•
F : EAN13 (Addon 5)
•
FF : EAN8 (Addon 5)
•
K : Code 128
•
L : Code 93
2.4.2 Code Length
There are optional 2 digits code length can be added to the
data transmitted. These 2 digits indicates the length of the
bar-code being decoded, and is placed after Code ID (if
enabled) and before bar-code data.
2.4.3 Prefix and Postfix
Up to 4 characters could be programmed for both prefix and
postfix codes. The prefix code programmed will be placed
before Code ID., and the postfix code programmed will be
placed after the bar code data and before the delimiter
characters.
For 1022R, the prefix and the postfix codes sent are the ASCII
code that programmed. For 1022K, please refer to the bd
Wedge Map Table” .
When 1022K is emulating PCAT, PS55, PS2-30, or Memorex
Telex, keystrokes can be sent without the Kbd scan code
remapping process. If the can Code in Prefix / Postfix”
setting is enabled, the prefix / postfix codes programmed will
be treated as scan code and be sent directly.
2.4.4 Trailer / Delimiter
Various trailers / delimiters can be selected and will be
automatically appended to the data being transmitted. One
out of the followings can be selected.
•
NULL
: no delimiter character will be appended
•
SPACE
: the character "space"
•
HTAB
: the character "tablet"
•
CR
: the character carriage-return
•
CR + LF
: the character carriage-return followed by a line-
feed character
•
LF
: the character line-feed
•
EXEC
: the Exec key (if available on the target Kbd)
