18
110 Series Ice and Water Dispensers
How unit works — SensorSAFE models
SensorSAFE models provide “touchless” ice and water dispensing. When a container is placed within the actuation
zone below the ice or water chute on SensorSAFE dispenser models, an infrared signal refl ects off the container and is
detected by the sensor. The sensor then sends a signal to the control board to activate the appropriate components to
dispense ice or water. LEDs on the board indicate when the board is receiving a signal from the sensors.
A safety, shut-off feature automatically shuts off dispensing after one minute of continuous activation. Dispensing can be
restarted by moving the container away and then returning it to the actuation zone.
Dispensing can be temporarily suspended for cleaning by depressing and releasing the clean switch, located under the
left side of the top front cover. Depressing and releasing the button a second time will return the dispenser to normal
operating state. If the clean switch is not depressed a second time, the dispenser will automatically resume normal
dispense operation (CLN LED goes out) after two minutes. An LED on the control board will light to indicate that the
dispensing has been suspended by activation of the clean switch.
CLEAN
NEUTRAL
WTR
CLN
WM
SOL
L1
PWR
GND
WTR
ICE
PUR
ORANGE
YLW
YLW
BLA
CK
SWITCH
WHITE
BLACK
WHITE
WHITE
S
WTR
RD
RELAY
ORANGE
RD
RD
SWITCH
T-STAT
BIN SIGNAL
MAIN POWER
SWITCH
4
1
TIMER
1 2 3
WHITE
WHITE
WHITE
WHITE
WHITE
PUR
BLK
ICE MACHINE
BIN SIGNAL
(120 VAC)
B
RLY
A
M
7
LOCATED BEHIND SPLASH PANEL
4x4 JUNCTION BOX
WHI
TE
GREEN
BLA
CK
POWER
ICE MACHINE
(120 VAC)
60hz
115VAC
WHITE
