Symmetricom Z3801A, User Manual

Page: 88 / 98

Chapter 4 Command Listing and Status Information
Error Messages
4-22 User’s Guide
-141 Invalid character data The character data element contains an invalid character.
-148 Character data not allowed A legal character data element was encountered where
prohibited by the Receiver.
-150 String data error This error can be generated when parsing a string data
element. This particular error message is used if the
Receiver cannot detect a more specific error.
-151 Invalid string data A string data element was expected but was invalid for some
reason.
-158 String data not allowed A string data element was encountered but was not allowed
by the Receiver at this point in parsing.
-170 Expression error This error can be generated when parsing an expression
data element. It is used if the Receiver cannot detect a more
specific error.
-178 Expression data not allowed Expression data was encountered but was not allowed by the
Receiver at this point in parsing.
-200 Execution error This is the generic syntax error if the Receiver cannot detect
more specific errors.
-220 Parameter error Indicates that a program data element error occurred. This
error is used when the Receiver cannot detect more specific
errors.
-221 Settings conflict Indicates that a legal program data element was parsed but
cound not be executed due to the current receiver state.
-222 Data out of range Indicates that a legal program data element was parsed but
could not be executed because the interpreted value is
outside the legal range defined by the Receiver.
-223 Too much data Indicates that a legal program data element of block,
expression, or string type was received that contained more
data than the Receiver could handle due to memory or
related receiver-specific requirements.
-224 Illegal parameter value Used where exact value, from a list of possible values, was
expected (but not received).
-230 Data corrupt or stale No valid data available.
-240 Hardware error Indicates that a legal program command or query could not
be executed because of a hardware problem in the Receiver.
-241 Hardware missing Indicates that a legal program command or query could not
be executed because of missing receiver hardware.
-300 Device-specific error This is the generic device-dependent error.
-310 System error Indicates that a system error occurred.
-321 Out of memory Indicates that the Receiver has detected that insufficient
memory is available.
Number Error String Cause