Symmetricom Z3801A, User Manual

Page: 70 / 98

Chapter 4 Command Listing and Status Information
Z3801A Commands
4-4 User’s Guide
Refer to the 58503B/59551A GPS Receivers Operating and
Programming Guide (58503-90013) for detailed descriptions of
commands listed in tables 4-1 and 4-2.
Table 4-1. Z3801A INSTALL Commands
Keyword/Syntax Parameters/
Responses Comments
*CLS Clear errors.
*IDN? returns unquoted string Identify revision of download control firmware.
DIAGnostic Node Only. “INSTALL” language is used for
downloading firmware.
:DOWNload <Motorola® S_Record> Send down a Motorola S-Record.
:ERASe Erase Flash.
:SYSTem Node Only.
:ERRor? returns INT, quoted string first parameter is error number, quoted string is error
description.
:LANGuage “PRIMARY” | “INSTALL” Use “PRIMARY” to switch to normal operation
commands.
Table 4-2. Z3801A PRIMARY Commands
Keyword/Syntax Parameters/
Responses Comments
*CLS Clears event status registers and error queue.
*ESE <mask value> Sets or returns standard event status enable
register.
*ESR? returns register value Returns and clears standard event status
register.
*IDN? returns unquoted string Returns identification string.
*SRE <mask value> Sets or returns service request enable register.
*STB? returns INTEGER Returns the value of the Status Byte.
*TST? returns INTEGER Runs self tests. 0 = passed, non-zero is test
specific code.