098-00106-000 Revision A – March, 2009
TimeProvider 100 User’s Guide
35
Chapter 2 Installation and Configuration
Configuration Setup
Setting IP Static Mode
Use the NTP port for static mode. The NTP port can only be set to static
mode. To set the IP settings with the following settings: IP address =
192.168.2.8, gateway = 192.168.2.1, and IP subnet mask = 255.255.255.0,
follow these steps:
1. Type and the following CLI command and then press
Enter
.
tp100> set ipconfig NTP ipaddr 192.168.2.8 mask 255.255.255.0 gateway 192.168.2.1
2. To make the settings available, type the following CLI command and then press
Enter
:
tp100> set ipconfig NTP restart
Use values appropriate for your network environment.
Confirm the setting and status by using the
show ipconfig
and
show status
commands. Use the
set ipconfig
CLI command to configure IP settings
appropriate to your network. To confirm the IP address values, use the
show
ipconfig
CLI command. Refer to
TimeProvider 100 CLI Command Set
56 for more information.
Caution
: After making configuration changes, you must use the s
et
configuration save
CLI command to save the latest
configuration. See
, on page 72 for more
information.
tp100> show ipstatus
MGMT Link encap:Ethernet HWaddr 00:B0:AE:01:A4:AB
inet addr:192.168.5.69 Bcast:192.168.5.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:519 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:41055 (40.0 KiB) TX bytes:1938 (1.8 KiB)
Base address:0xa000
NTP Link encap:Ethernet HWaddr 00:B0:AE:01:A4:AA
inet addr:192.168.2.10 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:84 (84.0 B)
Base address:0xc000
Summary of Contents for TimeProvider 100
Page 8: ...Table of Contents 8 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 10: ...List of Tables 10 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 12: ...List of Figures 12 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 124: ...Index W W 124 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...