76
TimeProvider 100 User’s Guide
098-00106-000 Revision A – March, 2009
Chapter 5 CLI Commands
Set Commands
Response:
<longitude String 6 - 13> - GPS Position Longitude, format: Eddd:mm:ss.ss or
Wddd:mm:ss.ss
Input:
tp100> set gps mode manual latitude N89:56:10 longitude E130:00:00 height ?
Response:
<height String 1 - 7> - GPS position height in meter, format: hhhh.h
Input:
tp100> set gps mode manual latitude N9:6:1 longitude E130:00:00 height 130
Response:
tp100>
set ipconfig
This command is used to configure the IP parameters of the management port and
future NTP port. The parameters are address, address acquisition mode, and
whether the port is enabled.
Input:
tp100> set ipconfig <tab>
Response:
MGMT NTP
tp100> set ipconfig
Input:
tp100> set ipconfig ?
Response:
MGMT
- Management port
NTP
- NTP port
tp100> set ipconfig
Note
: TimeProvider 100 only accepts positive height. Negative
heights are not accepted.
Summary of Contents for TimeProvider 100
Page 8: ...Table of Contents 8 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 10: ...List of Tables 10 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 12: ...List of Figures 12 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...
Page 124: ...Index W W 124 TimeProvider 100 User s Guide 098 00106 000 Revision A March 2009 ...